Factory Reset

A factory reset restores the Breeze to its original settings. All WiFi configuration is cleared. Trip logs stored on the device are preserved.

Caution

Only perform a factory reset if advised to do so, or if the device is completely unresponsive to other troubleshooting steps.

Steps

1. Make sure the Sway Breeze is switched on
2. Disconnect the Breeze from the NMEA 2000 network (or temporarily unplug the NMEA 2000 power)
3. Reconnect the power to the Breeze
4. Repeat steps 2–3 another 2 times (3 power cycles in total)
5. Wait — the LED will turn green to confirm the factory reset

After the green LED, the Breeze will restart with factory settings. You can then reconnect it via the Sway app as if it were new.